Our Products

Pulsed Neurocare

The Pulsed Neurocare home system will support the healing process needed for your peripheral neuropathy and nerve pain in the comfort of your home. The Pulsed Neurocare LED photobiomodulation (light therapy) system is the highest quality, most advanced, and powerful system on the market.

The Pulsed Neurocare 2-port controller shown above features advanced firmware (brains of the controller). This, along with the surface mounted diodes (SMD) technology found in the Ankle High 240 boot and lumbar 440 pad, makes the systems light-years ahead of all other systems being sold on the market. The Ankle-High 240 boots feature 240 powerful diodes versus 122 on most all other light therapy boots systems and our lumbar pad features 480 diodes versus 264 diodes on similar size pads sold on the market making the Neurocare Home boots and pads vastly more powerful.

For more details on how advanced these systems are and how they compare to the other light therapy systems on the market, please continue reading below.

Pulsed Neurocare is the only LED photobiomodulation manufacture that operates its own Neurocare Center. Pulsed Neurocare was designed and engineered in our Pulsed Neurocare center while working with live patients to not only advance our equipment but to advance our already effective care protocols.

How do our boots & pad systems stack up against the competitors?

The Pulsed Neurocare Ankle-High 240 boots feature 240 powerful Surface Mounted Diodes housed in 120 chipsets. Having both near infrared and red-light frequencies in a single chipset offers many advantages over the older “through-hole” technology.

Most all light podiatry boots on the market, including our sister company Neurocare Systems, use the older “through-hole” diodes which have served our purpose well successfully delivering light into the body tissue, though it is time we shed light on a far newer and superior technology in the form of SMD (surface mounted diodes) used in the Pulsed Neurocare systems.

SMD’s offer several advantages over their “through-hole” counterparts, including their reduced size, multi-color frequency capabilities for each SMD, improved beam angle, and wider aperture, meaning less heat and more balanced light disbursement into the tissue.

With the older “through-hole “LEDs, you will find that they are accompanied by a lot of extra accouterments creating additional expense for the manufacturer, including the wire leads, as well as additional optical light diffusers. With an SMD, most of this extraneous material is surplus to requirements, leaving only the part of the LED that emits light remaining.

The obvious advantage here is that SMDs can be made much smaller; usually between a quarter and a tenth of the size and weight of an equivalent through-hole component allowing Neurocare Systems to add size and increase power output to the LED pad and boot systems. Neurocare System uses the large 5mm SMD’s that contribute to the substantial increase in power out-put. With the absence of a light diffuser also allows for an improved beam angle covering larger areas of tissue cells during a treatment session.

5mm “through Hole” diodes have an incredibly narrow distribution of light, mostly commonly 20–30-degree angles creating more heat because the epoxy casing acts as a focusing lens. This equals fewer cells receiving light during a session. A narrow spread of light may be beneficial in some purposes such as treatments that is being performed at long distances, but when we are considering photobiomodulation boots and pads, a narrow pin-point spread is not ideal. The “through holes” are closer to the narrow laser diode spread of light than SMD.

Another negative of the “through-hole” is that because they are only a single frequency, most manufacture’s alternate 850nm Near Infrared and 630nm Red every other row. This coupled with the narrow spread of the “through-hole” light creates significant coverage voids into the tissue. SMD’s on the other hand house multiple diodes in each chipset, allowing for a combination the 850nm Near Infrared and 630nm Red wavelengths being emitted from a single chipset casing.

This is beneficial over the entire pad or boot, because both 850nm and 630nm wavelengths are in each chipset and are evenly distributed throughout the entirety of the pad and are devoid of dead spots of the polychromatic light.

Also, with a light emitting angle of 120-degrees (versus 20-degrees on the older through hole diodes) the SMD’s offer a much larger spread of the light photons. The bigger the spread, the bigger the target area is exposed to beneficial photobiomodulation light, which equates for a better treatment and thus, better results. SMD’s omit less heat and allows a higher power output and thus more joules entering the cells.

In further contrast, the light from an SMD is very diffused, which makes them more suitable for medical applications that require a wide beam angle.

The SMD are flat and reset diodes. We took great care to make sure that we also deliver added comfort on our boot and pad systems for patients during use. Some manufacturers of the older technology will have you believe that their outdated “through hole” technology that features protruding diodes is by design so when these diodes stick into your patients’ tissue and bone, it is closer to the effected tissue and yields better results.

LED PBM penetration studies strongly contradict these false claims. In fact, the number one complaint from patients is how uncomfortable these protruding diodes are, especially if they have edema or other tissue and or bone sensitivity.

Other notable features: The Pulsed Neurocare Ankle-High 240 boots and the Lumbar 440 pad features finished edges to avoid fraying and add to the longevity of use. The 240 also features wide build in straps, which makes placing the boots on your foot and leg much easier by our self and thus, delivering a smoother and faster set up.

The Ankle-High 240 features a DC plug in systems to connect the boots and on the controller. This will eliminate the wires pulling or of the circuit board. Most all competitor products are hard wired into the PCB circuit board creating unnecessary defectives resulting from the wire being pulled away from the PCB board. This is not too common, but this of course depends on how the pad systems are being handled and if out of warranty, can shorten the life cycle of your boots or pads.

The Controllers

The Pulsed Neurocare 2-port is dramatically superior to any other light therapy controller used for in-clinic or home systems on the market. The highly advanced firmware features 18 preset pulsed setting for full body use. The N1 & N2 setting are for set for neuropathy and neuropathic pain and make it easy to select either N1 or N2, relax and begin your session. This controller delivers superior power and has 2 backlit displays, 2 ports and easy dc plug in system.

Pulsed Neurocare is designed and engineered in the USA

When a company makes the claim that they are made in the USA-perhaps a deeper look is needed.

MADE IS THE USA – REALLY??? Some of the lower quality products on the market use marketing ploys rather than produce a higher quality product line that you deserve.

Some of our competitors make a claim they are made in the USA. Well, this may not be what you think it is. These companies assemble older technology in the USA and sell it at a premium price supported by inaccurate claims that it is made/manufactured in the USA. The truth is that every single component they use to assemble the pads and controllers are made in China. This includes the diodes, neoprene, PCB boards, cables, plastic controller casings and power source are ALL made in China. Yes, it is true they do assemble in the USA and place it in a box. That is not made in the USA, that is assembled in the USA and that is the reality of it.

 

 

Our Guarantee

Pulsed Neurocare LED therapy systems are highest quality, advanced and affordable Photobiomodulation (light therapy) boot systems on the market. Maintaining our elite status is not taken lightly and we continue to strive to improve the technology and protocols at our Pulse Centers. Our job does not end when you order your system, but rather it begins. We are here for you and will coach you through the process of using this equipment with your home care and will provide you lifestyle tips to further add to the success of your self-care.

pulsed neurocare center florida

Buy directly from the manufacturer and save!

Translate »